Basic Info.
Output Type
AC Three Phase
Transport Package
Polywood Case
Product Description
A wind turbine, which is installed on top of a tall tower, collects kinetic energy from the wind and converts it to electricity that is compatible with a home's electrical system.
In a normal residential application, a home is served simultaneously by the wind turbine and a local utility. If the wind speeds are below cut-in speed (7-10 mph) there will be no output from the turbine and all of the needed power is purchased from the utility. As wind speeds increase, turbine output increases and the amount of power purchased from the utility is proportionately decreased.
We are in the market for horizontal wind tubine from 0.1kw to 200kw
| Generator | Blades diameter: 25(M) |
| Rated rotor speed: 60(r/m) |
| Rated speed:12(m/s) |
| Rated power:200KW |
| Max power:250KW |
| Output voltage:420V |
| Start up wind speed: 4(m/s) |
| Work speed:4-30(m/s) |
| Security wind speed:50(m/s) |
| Generator shell material:Pressure cast iron |
| Free standing tower | Height of pole: 23 m |
| Thickness:12 mm |
| Top flange diameter:1000mm,Bottom flange diameter:2.5m |
| Flange diameter: 3m |
| Sections of tower:4 |
| Material: Q235 free stand tower |
| Surface treatment: Galvanizing, spray |
| Blades | Material of blades:High efficiency FRP material, unidirectional high strength glass fiber, modernization craft vacuum cast technique synthesis |
| Number of blades:3PCS |
| Length of blades: 12M |
| Dome | Material of dome:FRP Lay-up by hand |
| Number of dome:1PCS |
| Dog vane & Anemoscope | Dog vane: |
| measuring range : Overall |
| power supply voltage: 24v DC |
| output signal:4-20mA |
| Accuracy :±0.5% |
| |
| Anemoscope: |
| measuring range :0-30 m/s |
| power supply voltage: 24v DC |
| output signal:4-20mA |
| Accuracy :±0.5m/s |
| load ability:≥500Ω ,≤3 KΩ |
| On grid Controller | Rated Wind Input Power:200kW |
| Control Mode: PLC (Programmable Logic Control ) |
| Display Method: LCD (LCD touch screen) |
| Display Parameter: Voltage, Current, State parameter,wind speed. |
| Cooling Method:Fan |
| Protection Type:Reverse-charge protection , reverse connect protection ,reverse-connect protection,wind turbine automatic brake and Manual brake protection |
| Operation Ambient Temperature:-20~50ºC |
| Operation Altitude:≤4000m |
| Operation Ambient Humidity:0~90%,no condensing |
| On gird Inverter | Type:BNWG-250KS |
| Rated capacity:250 KVA |
| Rated AC output power:250 KVA |
| Max. AC output power:300 KVA |
| Insulate mode:low frequency transformer |
| Recommended PV array power:300 KVA |
| Max. open circuit voltage:1150VDC |
| MPPT range:400~1150VDC |
| Max. input current:625A |
| Connecting mode of battery board:line terminals |
| Max. efficiency:94% |
| Europe efficiency:92% |
| Operating range utility voltage(three phase):320~440VAC |
| Operating range utility frequency:50HZ±2%&60HZ±2% |
| Total Harmonic Distortion(THD):<3% |
| Power factor:≥0.99 |
| Zero power consumptive at night:<10W |
| Communication Interfaces:RS485/RS232 |
| Electrical insulation properties:1500Vac,1minute |
| Operation surroundings Temperature:-25~+60ºC |
| operation surroundings Humidity:0~100% |
| Protection:Protection for input connecting contrary, input lack of voltage, output over load, output short circuit and over heat. |
| cooling mode:windy |
| Noisy:<50dB |
| waterproof and Dustproof Class:IP20(indoor),IP65(outdoor) |
| Size(L×W×Hmm):800*1200*2260double screen |
| Weight(kg):1200 |
| Cables | Dim (copper): Φ50mm 30m |
| Material: copper & PVC |
| |
| |
Address:
Room 808, Jinyu Central Plaza, 33 Mufu West Road, Xiaguan, Nanjing, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Agriculture & Food, Auto, Motorcycle Parts & Accessories, Construction & Decoration, Electrical & Electronics, Industrial Equipment & Components, Lights & Lighting, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Service, Tools & Hardware
Management System Certification:
ISO 9001, ISO 29001
Company Introduction:
Xinda Green Energy Co., Limited established in 2008, and have over 10years experience in new energy market, our company located in Nanjing China, we specialized in handling the business of green energy as below
1) Horizontal wind turbine generator from 300W to 200kw, vertical wind turbine from 300W-20kw, both on grid and off grid and also wind solar hybrid system. Both with CE certificate.
2) various kind of permanent magnet generator(0.05-3000kw), speed from 20rpm-20000rpm, which is widely used for wind turbine, hydro turbine, tidal turbine, ocean turbine, free energy and so on, high speed motor from 6000rpm to 15000rpm we can custom generator according customer request about speed, voltage, frequency, shaft size, cooling method and so on
3)both vertical and horizontal, small hydro turbine system(low head and higher head), such as franics turbine, kaplan turbine, tubular turbine and so on, all hydro turbine system design according water head and flow, power from 300W to 10MW.
We have over 10years in the market, know well about new energy market and products. Low speed generator, small hydro turbine are popular used in Europe, America, South Africa and so on area
Our partner manufacturers are committed to continuously improving our operations and meeting the needs of our customers through innovation and new product development. We work closely with them to optimize the performance and cost-effectiveness of their processes.
Any question, welcome to contact us. We will answer your questions at any time!
