Basic Info.
Output Type
AC Three Phase
Number of Blade
Three Blade
Rotating Shaft
Horizontal
Stress Way of Blade
Resistance
Transport Package
Polywood Case
Product Description
Advantage:
There are a Centrifugal wheel intelligent deceleration device inside of the head of generator. It make the wind turbine will not overspeed running at large wind spped, the generator can output power normally within the range of rated rotate speed, also avoid wind turbine braking or stopping on the condition of large wind speed. The efficiency and safety of full system have been improved for much, and also can protect the controller and inverter, extend the working life of batteries.
Model | XDF2KW | Rotor diameter | 3.2m |
Blades quantity | 3 pcs | Blades material | FRP (Fiber reinforce plastic) |
Rated speed | 320r/min | Rated output power | 2KW |
Max output power | 3000W | Output voltage | DC48V 72V 96V /AC220V |
Start wind speed | 2.5m/s | Rated wind speed | 9m/s |
Working wind speed | 3-25m/s | Security wind speed | 40m/s |
Speed regulation | yaw& magnetic resistance | Charge control | AIC (automatic intelligent control) |
Wind turbine type | PMG (Permanent magnet generator) | Working temperature | from -40ºC to +60 ºC |
Annual average energy production | 5000kWh | Recommended accumulators | 12V200AH6PCS( 1200Ah ) |
Accumulators full charge time | about 8 hours | Tower type | pull wire tubular tower or cone tower(optinal) |
Tower height | 6m (optional) | Weight | 80kgs (without tower) |
CAN SUPPLY POWER FOR | Air-condition. Refrigerator water pump. electric cooker.TV.washer. Illumine. Fanner. Charge |
Package
NO | ITEM | UNIT | QUANTITY | DESCRIPTION |
1 | GENERATOR | PC | 1 | 72V |
2 | BLADE | SET | 1 | 1.6M |
3 | DOME | PC | 1 | Φ200 |
4 | PRESS BOARD | PC | 1 | Φ280 |
5 | TAIL POLE | PC | 1 | 2KW |
6 | TAIL VANE | PC |
7 | BLADES SCREW AND NUT | PC | 9 | M10*65 |
8 | DOME SCREW AND NUT | PC | 3 | M6*25 |
9 | TAIL POLE PIN | PC | 1 | M16*170 |
10 | TAIL VANE SCREW AND NUT | PC | 1 | M8*40 |
11 | CONTROLLER AND INVERTER | PC | 1 | 2kw 72v |
12 | TOWER | PC | 2 | Φ89*3M |
13 | GENERATOR AND TOWER SCREW AND NUT | PC | 8 | M16*40 |
14 | CABLE | METER | 10 | 3*2.5 |
15 | PULLING WIRE | METER | 20 | Φ6 |
16 | PULLING WIRE CLIP | PC | 6 | |
17 | WIRE GRIP | PC | 3 | |
18 | BASE PLATE | PC | 1 | |
19 | BASE SCREW PIN | PC | 2 | M16*40 |
20 | GROUND ANCHOR AND SCREW NUT | PC | 4 | M14*40 |
21 | GROUND HOOK | PC | 3 | Φ10*40 |
Address:
Room 808, Jinyu Central Plaza, 33 Mufu West Road, Xiaguan, Nanjing, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Agriculture & Food, Auto, Motorcycle Parts & Accessories, Construction & Decoration, Electrical & Electronics, Industrial Equipment & Components, Lights & Lighting, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Service, Tools & Hardware
Management System Certification:
ISO 9001, ISO 29001
Company Introduction:
Xinda Green Energy Co., Limited established in 2008, and have over 10years experience in new energy market, our company located in Nanjing China, we specialized in handling the business of green energy as below
1) Horizontal wind turbine generator from 300W to 200kw, vertical wind turbine from 300W-20kw, both on grid and off grid and also wind solar hybrid system. Both with CE certificate.
2) various kind of permanent magnet generator(0.05-3000kw), speed from 20rpm-20000rpm, which is widely used for wind turbine, hydro turbine, tidal turbine, ocean turbine, free energy and so on, high speed motor from 6000rpm to 15000rpm we can custom generator according customer request about speed, voltage, frequency, shaft size, cooling method and so on
3)both vertical and horizontal, small hydro turbine system(low head and higher head), such as franics turbine, kaplan turbine, tubular turbine and so on, all hydro turbine system design according water head and flow, power from 300W to 10MW.
We have over 10years in the market, know well about new energy market and products. Low speed generator, small hydro turbine are popular used in Europe, America, South Africa and so on area
Our partner manufacturers are committed to continuously improving our operations and meeting the needs of our customers through innovation and new product development. We work closely with them to optimize the performance and cost-effectiveness of their processes.
Any question, welcome to contact us. We will answer your questions at any time!