Basic Info.
Operating Speed
Adjust Speed
Number of Poles
2-12 Poles
Voltage
20V/380V, 380V, 3000V & 6000V/10kv
Transport Package
Polywood Case
Product Description
This series meets JB/ T8667.1-1997
Technical Specifications of Series TK Large-sized 3-phase Synchronous Motor and GB755
Basic Technical Requirements for Rotating Motor as well as standards of IEC. A stationary controllable silicon exciter is a used as its excitation system. It is allowed to be directly started at full voltage, when full-voltage starting is not allowed due to the capacity of the power grid, it can be started at reduced voltage. The series has many advantages, such as compact structure, high efficiency, low noise, slight vibration, high reliability and installation & maintenance convenience.
The series is suitable to drive reciprocating air compressor, suitable to be used in such an indoor environment with a temperature varying with seasons, but not more than 40ºC while not less than -5ºC, with less dust, and without vapour, acid, alkali or corrosive/explosive gas.
The series adopts an enclosure protection class IP, cooling mode IC 01. For the ones with other protection class or cooling mode, users can negotiate with us. The series' rated voltage is 6000V, and also, we can produce the ones with a voltage of 10,000V (allowable deviation range: ±5%), rated power 50Hz and rated power factor 0.9 (lead).
The number of the motor's stator leads can be 3, 6, 9 or 12 as per customer requirements.
The adoption of insulation materials with an insulation class of B or F for stator and rotor windings (temperature rise assessed in line with class B) is helpful to prolong the motor's service life; and because stator and rotor winding terminals have been fixed and strapped reliably and processed with solvent-free VPI (vacuum pressure impregnation) and have gone through many times of tests for turn-to-turn impulse withstand voltage and withstand voltage to ground, the motor has excellent and reliable insulation performance, high mechanical strength and strong moisture proofing. We can add thermodetectors at key parts, e.g. stator windings and bearings as required by users, so as to ensure its safe and reliable operation.
Series TK is mainly used to drive reciprocating air compressor, and can also be used to drive water pump, fan and other general mechanical equipment.
Model |
Structure | Ratings | Power factor |
Efficiency % | / Locked current /rated current | / Locked torque/ Rated torque | / Pull-in torque /Rated torque | / Pull-out torque /Rated torque |
Conn. |
Rotational inertia kg · m2 |
Model of exciter |
Weight t | Power kW | Voltage V | Current A | TK350-12/1180A | shaftless suspension | 350 | 3000 | 81.4 | 0.9 | 91.0 | 6.0 | 1.0 | 0.5 | 1.8 | 2Y | 125 | KGLF11-200/75 | 3.69 | TK350-12/1180A | shaftless suspension | 350 | 6000 | 40.7 | 0.9 | 91.0 | 6.0 | 1.0 | 0.5 | 1.8 | Y | 125 | KGLF11-200/75 | 3.69 | TK320-14/1430 | single shaft extension | 320 | 6000 | 37.6 | 0.9 | 90.5 | 6.5 | 0.9 | 0.7 | 1.8 | | 225 | KGLF11-200/110 | 7.65 | TK350-14/1430 | shaftless suspension | 350 | 6000 | 41.1 | 0.9 | 91.0 | 6.0 | 0.9 | 0.8 | 1.8 | Y | 250 | KGLF11-200/75 | 4.58 | TK500-14/1430A | single shaft extension | 500 | 6000 | 58.1 | 0.9 | 92.0 | 6.0 | 0.9 | 0.8 | 1.8 | Y | 325 | KGLF11-200/75 | 8.52 | TK600-14/1430 | single shaft extension | 600 | 6000 | 67.8 | 0.9 | 92.5 | 6.0 | 0.9 | 0.7 | 1.8 | Y | 275 | KGLF11-200/75 | 8.16 | TK300-16/1430 | shaftless suspension | 300 | 6000 | 35.3 | 0.9 | 91.0 | 6.0 | 0.8 | 0.7 | 1.8 | Y | 200 | KGLF11-200/75 | 4.49 | TK315-16/1430 | shaftless suspension | 315 | 6000 | 37 | 0.9 | 91.0 | 6.0 | 0.8 | 0.7 | 1.8 | Y | 200 | KGLF11-200/75 | 4.51 | TK320-16/1430 | single shaft extension | 320 | 6000 | 37.4 | 0.9 | 91.0 | 6.5 | 0.7 | 0.9 | 1.8 | | 250 | KGLF11-200/75 | 8.21 | TK400-16/1430 | single shaft extension | 400 | 6000 | 46.2 | 0.9 | 92.5 | 5.5 | 0.7 | 0.9 | 1.8 | Y | 275 | KGLF11-200/75 | 7.76 | TK800-16/1430 | double shaft extension | 800 | 6000 | 90.5 | 0.9 | 93.0 | 6.0 | 0.9 | 0.6 | 1.8 | Y | 375 | KGLF11-200/110 | 11.95 | TK630-14/1730 | single shaft extension | 630 | 6000 | 71.7 | 0.9 | 92.0 | 6.5 | 0.9 | 0.8 | 1.8 | Y | 500 | KGLF11-200/75 | 11.10 | TK800-14/1730 | single shaft extension | 800 | 6000 | 91 | 0.9 | 92.0 | 6.5 | 0.9 | 0.8 | 1.8 | Y | 625 | KGLF11-200/110 | 11.70 | TK1700-14/1730 | double shaft extension | 1700 | 6000 | 189.1 | 0.9 | 95.0 | 6.5 | 0.8 | 0.8 | 1.8 | | 900 | KGLF11-200/110 | 16.30 | TK550-16/1730B | shaftless suspension | 550 | 6000 | 63.9 | 0.9 | 92.0 | 6.0 | 0.7 | 0.8 | 1.8 | Y | 525 | KGLF11-200/75 | 5.47 | TK550-16/1730C | single shaft extension | 550 | 6000 | 63.9 | 0.9 | 92.0 | 6.0 | 0.7 | 0.8 | 1.8 | Y | 660 | KGLF11-200/75 | 10.85 | TK710-16/1730 | single shaft extension | 710 | 10000 | 49.5 | 0.9 | 92.0 | 6.5 | 0.7 | 0.8 | 1.8 | Y | 750 | KGLF11-200/75 | 10.76 | TK1000-16/1730 | single shaft extension | 1000 | 6000 | 113.2 | 0.9 | 93.0 | 6.5 | 0.9 | 0.7 | 1.8 | Y | 750 | KGLF11-200/110 | 13.00 | TK300-18/1730 | shaftless suspension | 300 | 6000 | 35.4 | 0.9 | 90.5 | 6.0 | 0.9 | 0.7 | 1.8 | Y | 450 | KGLF11-200/75 | 5.49 | TK400-18/1730 | shaftless suspension | 400 | 6000 | 46.2 | 0.9 | 91.5 | 6.5 | 0.9 | 0.7 | 1.8 | | 500 | KGLF11-200/75 | 5.73 | TK400-18/1730 | shaftless suspension | 400 | 10000 | 28.0 | 0.9 | 91.5 | 6.0 | 0.9 | 0.7 | 1.8 | Y | 450 | KGLF11-200/75 | 6.24 | TK450-18/1730 | single shaft extension | 450 | 10000 | 31.5 | 0.9 | 91.0 | 6.0 | 1.8 | 0.9 | 1.8 | Y | 700 | KGLF11-200/75 | 11.48 | TK500-18/1730 | shaftless suspension | 500 | 10000 | 34.9 | 0.9 | 92.0 | 6.0 | 0.9 | 0.7 | 1.8 | Y | 550 | KGLF11-200/75 | 6.81 | TK550-18/1730A | shaftless suspension | 550 | 6000 | 63.9 | 0.9 | 92.0 | 6.0 | 0.9 | 0.7 | 1.8 | Y | 550 | KGLF11-200/75 | 6.58 | TK550-18/1730 | shaftless suspension | 550 | 10000 | 38.4 | 0.9 | 92.0 | 6.0 | 0.9 | 0.7 | 1.8 | Y | 550 | KGLF11-200/75 | 6.81 | TK550-18/1730 | single shaft extension | 550 | 6000 | 63.2 | 0.9 | 92.0 | 6.5 | 0.9 | 0.7 | 1.8 | | 550 | KGLF11-200/75 | 11.40 | TK550-18/1730 | single shaft extension | 550 | 10000 | 38.4 | 0.9 | 92.0 | 6.0 | 0.9 | 0.7 | 1.8 | Y | 550 | KGLF11-200/75 | 6.81 | TK550-20/1730 | shaftless suspension | 550 | 10000 | 38.4 | 0.9 | 92.0 | 6.5 | 0.9 | 0.7 | 1.8 | Y | 875 | KGLF11-200/110 | 7.71 | TK630-20/1730 | shaftless suspension | 630 | 10000 | 43.9 | 0.9 | 92.0 | 6.5 | 0.9 | 0.7 | 1.8 | Y | 875 | KGLF11-200/110 | 7.71 | TK630-20/1730B | single shaft extension | 630 | 6000 | 73.2 | 0.9 | 92.0 | 6.0 | 0.9 | 0.7 | 1.8 | Y | 875 | KGLF11-200/110 | 10.95 | TK1000-14/2150 | single shaft extension | 1000 | 6000 | 113.7 | 0.9 | 93.5 | 6.5 | 1.0 | 0.8 | 1.8 | Y | 750 | KGLF11-300/75 | 14.60 | TK1000-14/2150 | single shaft extension | 1000 | 10000 | 68.0 | 0.9 | 93.0 | 7.0 | 1.0 | 0.8 | 1.8 | Y | 1250 | KGLF11-300/75 | 15.56 | TK1250-14/2150 | single shaft extension | 1250 | 6000 | 141.5 | 0.9 | 94.0 | 6.0 | 1.1 | 0.8 | 1.8 | Y | 750 | KGLF11-300/75 | 15.00 | TK800-16/2150 | single shaft extension | 800 | 6000 | 91.5 | 0.9 | 92.5 | 6.5 | 1.0 | 0.6 | 1.8 | | 1500 | KGLF11-300/75 | 13.60 | TK1000-16/2150 | single shaft extension | 1000 | 10000 | 68.1 | 0.9 | 92.5 | 6.5 | 1.0 | 0.8 | 1.8 | | 2000 | KGLF11-300/75 | 13.90 | TK1250-16/2150 | single shaft extension | 1250 | 6000 | 141.5 | 0.9 | 94.5 | 6.0 | 1.1 | 0.9 | 1.8 | Y | 1250 | KGLF11-300/75 | 15.10 | TK1250-16/2150A | single shaft extension | 1250 | 6000 | 141.5 | 0.9 | 94.5 | 6.0 | 1.1 | 0.9 | 1.8 | Y | 1250 | KGLF11-300/75 | 15.10 | TK1250-16/2150 | single shaft extension | 1250 | 10000 | 84.7 | 0.9 | 94.5 | 7.0 | 1.1 | 0.9 | 1.8 | Y | 1250 | KGLF11-300/75 | 15.90 | TK1250-16/2150A | single shaft extension | 1250 | 10000 | 84.7 | 0.9 | 94.5 | 7.0 | 1.1 | 0.9 | 1.8 | | 1250 | KGLF11-300/75 | 15.90 | TK1500-16/2150 | single shaft extension | 1500 | 6000 | 169.7 | 0.9 | 94.5 | 6.0 | 1.1 | 0.9 | 1.8 | Y | 1500 | KGLF11-300/110 | 16.45 | TK2800-16/2150 | single shaft extension | 2800 | 6000 | 311.8 | 0.9 | 95.0 | 6.5 | 0.9 | 0.8 | 1.8 | | 2000 | KGLF11-300/110 | 21.60 | TK1250-18/2150A | single shaft extension | 1250 | 6000 | 142.2 | 0.9 | 94.0 | 6.0 | 1.0 | 0.7 | 1.8 | Y | 2000 | KGLF11-300/75 | 16.14 | TK1250-18/2150 | single shaft extension | 1250 | 10000 | 85.3 | 0.9 | 94.0 | 6.5 | 1.0 | 0.7 | 1.8 | Y | 2000 | KGLF11-300/75 | 16.34 | TK630-20/2150 | single shaft extension | 630 | 6000 | 74 | 0.9 | 91.0 | 6.0 | 0.9 | 0.8 | 1.8 | Y | 1625 | KGLF11-200/110 | 13.38 | TK750-20/2150 | single shaft extension | 750 | 6000 | 87.2 | 0.9 | 92.0 | 6.0 | 0.9 | 0.8 | 1.8 | Y | 1625 | KGLF11-200/110 | 13.88 | TK800-20/2150 | single shaft extension | 800 | 10000 | 55.8 | 0.9 | 92.0 | 6.5 | 0.9 | 0.8 | 1.8 | Y | 1650 | KGLF11-300/75 | 15.25 | TK1000-20/2150 | double shaft extension | 1000 | 10000 | 69 | 0.9 | 93.0 | 6.5 | 0.9 | 0.8 | 1.8 | Y | 2000 | KGLF11-300/75 | 15.51 | TK1250-20/2150 | single shaft extension | 1250 | 6000 | 140.7 | 0.9 | 93.5 | 6.5 | 0.9 | 0.8 | 1.8 | Y | 2000 | KGLF11-300/75 | 16.30 | TK2800-20/2150 | single shaft extension | 2800 | 6000 | 309.7 | 0.9 | 95.0 | 6.5 | 1.0 | 0.8 | 1.8 | Y | 3750 | KGLF11-300/110 | 24.10 | TK2800-16/2600 | single shaft extension | 2800 | 10000 | 188.2 | 0.9 | 94.0 | 6.5 | 1.0 | 0.8 | 1.8 | Y | 2000 | KGLF11-300/140 | 27.00 | TK3100-16/2600 | double shaft extension | 3100 | 6000 | 348.9 | 0.9 | 95.0 | 6.0 | 1.0 | 0.7 | 1.8 | Y | 4000 | KGLF11-300/140 | 26.23 | TK3200-16/2600 | double shaft extension | 3200 | 6000 | 360.12 | 0.9 | 95.0 | 6.5 | 1.0 | 0.7 | 1.8 | Y | 2000 | KGLF11-300/140 | 27.53 | TK2800-18/2600 | single shaft extension | 2800 | 6000 | 313 | 0.9 | 95.0 | 6.0 | 0.9 | 0.8 | 1.8 | Y | 4000 | KGLF11-300/140 | 27.20 | TK3000-18/2600 | single shaft extension | 3000 | 6000 | 334.3 | 0.9 | 95.0 | 6.5 | 1.1 | 0.9 | 1.8 | Y | 4000 | KGLF11-300/140 | 27.80 | TK3000-18/2600 | single shaft extension | 3000 | 10000 | 201 | 0.9 | 95.0 | 6.0 | 1.1 | 0.9 | 1.8 | Y | 4000 | KGLF11-300/140 | 29.10 | TK3200-18/2600 | single shaft extension | 3200 | 6000 | 360.1 | 0.9 | 95.0 | 6.5 | 1.0 | 0.7 | 1.8 | Y | 4000 | KGLF11-300/140 | 28.45 | TK2000-20/2600 | single shaft extension | 2000 | 6000 | 224 | 0.9 | 94.5 | 6.5 | 0.8 | 0.8 | 1.8 | | 5000 | KGLF11-300/110 | 25.20 |
|
Address:
Room 808, Jinyu Central Plaza, 33 Mufu West Road, Xiaguan, Nanjing, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Agriculture & Food, Auto, Motorcycle Parts & Accessories, Construction & Decoration, Electrical & Electronics, Industrial Equipment & Components, Lights & Lighting, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Service, Tools & Hardware
Management System Certification:
ISO 9001, ISO 29001
Company Introduction:
Xinda Green Energy Co., Limited established in 2008, and have over 10years experience in new energy market, our company located in Nanjing China, we specialized in handling the business of green energy as below
1) Horizontal wind turbine generator from 300W to 200kw, vertical wind turbine from 300W-20kw, both on grid and off grid and also wind solar hybrid system. Both with CE certificate.
2) various kind of permanent magnet generator(0.05-3000kw), speed from 20rpm-20000rpm, which is widely used for wind turbine, hydro turbine, tidal turbine, ocean turbine, free energy and so on, high speed motor from 6000rpm to 15000rpm we can custom generator according customer request about speed, voltage, frequency, shaft size, cooling method and so on
3)both vertical and horizontal, small hydro turbine system(low head and higher head), such as franics turbine, kaplan turbine, tubular turbine and so on, all hydro turbine system design according water head and flow, power from 300W to 10MW.
We have over 10years in the market, know well about new energy market and products. Low speed generator, small hydro turbine are popular used in Europe, America, South Africa and so on area
Our partner manufacturers are committed to continuously improving our operations and meeting the needs of our customers through innovation and new product development. We work closely with them to optimize the performance and cost-effectiveness of their processes.
Any question, welcome to contact us. We will answer your questions at any time!